The VST-6927-3 is an economic, high performance stud mount wideband 3G/4G antenna for external use on a range of M2M devices including electronic advertising, vending machines, and metering applications. Stable omnidirectional gain and moderate-high efficiency across the entire operating frequency range ensures consistent reception and transmission.
This antenna is mounted on metal and plastic structures and is locked from the inside of the structure by a nut. Rubber gaskets at the base provide a watertight seal to the mounting structure. VST-6927-3 provides a 2 dBi gain across global UMTS/LTE bands when mounted on non-metallic surfaces, however performance is dramatically improved when mounting on a metal surface to act as a ground plane.
Two of these antennas separated >150 mm from each other are suitable for the LTE nominal MIMO applications.
Customised cable length and connectors are available. HB Radiofrequency recommend a minimum cable length of 70 mm when used on a ground plane to achieve an efficiency of greater than 40% in the 900 MHz band and greater than 60% in the 1800 MHz band.
Below data are calculated from electrical performance testing on a 400 x 400 mm ground plane.
- Wideband 690 to 2655 MHz covering most cellular bands
- Stud Mount for permanent applications
- No ground plane required
- Waterproof IP67 Rated
- 1.5 metre RG58 cable with SMA Male straight connector
- Fully customisable cable length and connector
Antenna Technical Data
Other - Black
75.4 x 45.2 mm (H x ø)
|Operating Temperature||-40 °C to 85 °C|
HB Radiofrequency is an OEM developer of custom RF components, such as antennas, coaxial interconnects, and passives. HB Radiofrequency was acquired by Australian telecommunications group Powertec Wireless Technology in 2021.